Solar light 20.30.48LED high brightness outdoor wall lamp body sensor light waterproof 20LED black solar energy
Product No: 723067
1. If the wall is wood, you can use screws to fix the product directly to a height of 2.5 meters. 2. If the wall is a cement wall, use a drill to drill holes in the cement wall, drive the white expansion plug into the wall, and then fix the product to the wall with screws. 3. If the wall is flat, it will Dust off the wall, can be directly bonded with 3M glue (optimal choice)
Note: This product is a rechargeable battery. When installing, pay attention to the fact that the top solar panel needs to be charged by sunlight. Do not put the product on the dark side.
Instructions for use
The white raised portion is the sensing head and the sensing range is 120 degrees. 1st gear: When the person walks by, the light will illuminate. After the person leaves the sensor's sensing range for 20 seconds, the light will automatically go out. 2 files: 1st gear: When the person walks by, the light will illuminate, and the person leaves the sensor's sensing range for 20 seconds. Becomes a weak light. 3 files: the light is illuminated at medium brightness, no induction mode.
Note: The product comes with a light-sensing function, charging during the day but not emitting light, starting work at night.
Upgrade 20 pieces. 30 pieces. 48 pieces of high-brightness solar lights, energy saving, green lighting, low power consumption and long life.
[Scope of use] Applicable to outdoor environments such as corridor corridors, garden gates, rooftops, and courtyard walls.
[Solar panel power] 5.5V/1-1.8W
[Lithium battery] 3.7V-1200mAh Economic model 800mA
[Light source] high brightness 20 beads / 30 beads / 48 beads
[material] new ABS plastic
[Working mode] Infrared human body induction + light control / low light
[Charging time] Sun exposure for 8-12 hours
[Working hours] Fully charged once, 50 times per night, can work continuously for 4 days
[Induction distance] 3-5 meters or so
[product size] 95*125*50mm